Toyota Intelligent Tester 2 User Manual

Posted By admin On 13.09.21

From warranties on Toyota replacement parts to details on features, Toyota Owners manuals help you find everything you need to know about your vehicle, all in one place.test Detailed Toyota manuals and Toyota warranty information help with questions about your vehicle specifications and maintenance schedules. TOYOTA Intelligent Tester2 &Toyota IT2 Scanner for Toyota, Suzuki with Oscilloscope 1.Latest software:2017.01 for Toyota/Lexus(Worldwide), Suzuki(North American area only ) Notice: The Toyota Intelligent Tester 2 Can only Do North America Area Suzuki. If you want You can Choose GM TECH2+ Suzuki 32MB Card for professional Suzuki diagnostic. Measuring leads for multimeter 2 - 1pc 7. Card-3pcs(2014.10 Toyota, 2014.10 Suzuki Card and Blank Card for Backup) Toyota Denso IT2 Names of the Parts: The names of the Intelligent Tester II parts are as follows. Toyota IT2 Parts' Name. After Service: 1. Guarantee: one year, from the date equipment arrival 2. Upgrade free for one year 3.

The GM Tech II comes with GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2010.The CANDI module for GM tech2 connects between the GM Tech 2 Flash’s diagnostic link cable and the OBD adapter. Once the CANDI module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.

The CANdi (Controller Area Network Diagnostic Interface) is an in-line cable module that works with existing Tech 2 components including the VCI, cables and adapters.

CANdi module is fully compatible with current and past Tech 2 software. The module powers up in a way that makes it transparent to the user. This allows the existing Tech 2 software to be used with no changes when the CANdi module is installed. If a vehicle requires the use of a CANdi module, the Tech 2 clone will enable features specific to the module.

Supports simultaneous communications on three CAN buses

Provides high-speed UART communications with the GM Tech2

A self test will help to check well Candi module is well connected or not. Here is the step-by-step instruction on how to do Teh2 candi interface self test.

1) Connect CANdi interface to the vehicle via 12 PIN ALDL connector

2) Run and complete all GM tech 2 scanner stand-alone self-test. Disconnect CANdi interface when run Tech2 scan tool self test.

3) Run VCI self test. If the VCI self-test fails, replace VCI module. Disconnect CANdi module when run VCI self test

4) Connect the CANdi module to an existing VCI module via DLC cable, and connect VCI module with vehicle. Make sure there is good connection between scanner and vehicle. Verify that the LED on the CANdi module is flashing.

5) After well connected with vehicle and Tech2 main unit, power up the GM Tech2 scan tool, the scanner is flashing. Software update procedure will display on the screen.

6) Browse to “Tool Options” menu, select “F9 CANdi Diagnostics” option

7) Two options available under CANdi Diagnostics menu: POST Test and Self Test

8) First run a POST Test. The CANdi POST result is used to determine if the module has any problems during the software upgrade or start-up sequence.

9) Then run Self Test, here is the CANdi Self Test Results figure


If the CANdi module is connected and an error screen occurs, disconnect the CANdi module from the Tech 2 and perform the test again.


Candi interface support GM vehicle list:

05 Buick Allure (3.6L)
05 Buick LaCrosse (3.6L)
05 Buick Rainier (5.3L)
04-05 Buick Rendezvous (3.6L)
04-05 Cadillac CTS (3.6L)
04-05 Cadillac SRX (3.6L / 4.6L)
04-05 Cadillac XLR (4.6L)
05 Cadillac STS (3.6L / 4.6L)
05 Chevrolet Cobalt (2.2L)
05 Chevrolet Corvette (6.0L)
05 Chevrolet Equinox (3.4L)
05 Chevrolet TrailBlazer (5.3L)
05 Chevrolet SSR (6.0L)
04 Chevrolet Malibu (Body/Chassis only)
05 Chevrolet Malibu (3.5L)
05 GMC Envoy (5.3L)
05 Pontiac G6 (3.5L)
05 Pontiac GTO (6.0L)
05 Pontiac Pursuit (2.2L)
03-05 Saturn ION (2.2L)

Feedback from customer:

GM tech2 would NOT work with All C5’s, if you’re going to use it on a C6, make SURE you have the CANDi modules.

I purchase a used CANDi module so I can use it on my C6.


Related posts:

Download & Technical Support

Best Quality TOYOTA DENSO Diagnostic Tester-2 IT2 for TOYOTA and SUZUKI V2017.12

Toyota Intelligent Tester Techstream

Toyota Intelligent Tester 2 User Manual Download

Toyota Intelligent Diagnostic Tester-2(DST-2) for TOYOTA & SUZUKI is a touch screen tool that enables you to diagnose control system for engines, ABS and airbag, even through CAN-diagnosis communication.

Toyota Intelligent Manual Transmission Review

Toyota Intelligent Tester 2 User Manual Free

Toyota Intelligent Tester 2 User Manual Online

1.All type of Toyota(made after 1996) and Lexus included read code, clear code , data flow, action testing and guard against theft initialization function. And it also supports OBD-II.
2.DENSO Diagnostic Tester-2(DST-2) for TOYOTA & LEXUS enables you to diagnose control system for engines, ABS and airbag, even through CAN-diagnosis communication.
3.CAN communication Diagnosis DST-2 realizes more accurate diagnosis through CAN communication that speed is 50 times faster than conventional.
4.Easy operation on LCE display with touch panel 5.7 inch full color display with touch panel assists an easier operation
5.Voltmeter and Oscilloscope not only communication basis diagnosis (Diagnostic code, ECU data monitor, Active test), but also voltmeter and oscilloscope detect alteration in the electric signal to find out the troubling part.
6.Data recording to your PC saved data such as.

Toyota Intelligent Tester 2 User Manual

Q:Is this new and with the oscilloscope too?
A: Yes, it is with oscilloscope .
Q: Can i use this product to do airbag coding?
A: Yes,you can.It can do airbag coding and simple ecu programming.