A Surface Connect to USB-C adapter. (See it in Microsoft Store) A supported Surface device. Surface Laptop (1st Gen), Surface Laptop 2, Surface Pro (5th Gen) with LTE Advanced, Surface Pro (5th Gen), or Surface Pro 6. A supported USB-C dock or charger. A USB-C dock or charger that supplies a minimum of 12V and 27W of power. Mackenzie Jackson, Microsoft Device Specialist from Data#3, demonstrates how to connect Apple devices to the Surface Hub 2 using the AirServer app.The Surfac.
- Connect Mac To Microsoft Surface Hub 2
- Connect Mac To Microsoft Surface Hub 2s
- Connect Mac To Microsoft Surface Hub
Surface Hub 2S enables you to connect external devices, mirror the display on Surface Hub 2S to another device, and connect multiple third-party peripherals including video conference cameras, conference phones, and room system devices.
You can display content from your devices to Surface Hub 2S. If the source device is Windows-based, that device can also provide TouchBack and InkBack, which takes video and audio from the connected device and presents them on Surface Hub 2S. If Surface Hub 2S encounters a High-Bandwidth Digital Content Protection (HDCP) signal, such as a Blu-ray DVD player, the source is displayed as a black image.
Surface Hub 2S uses the video input selected until a new connection is made, the existing connection is disrupted, or the Connect app is closed.
Recommended wired configurations
In general, it’s recommended to use native cable connections whenever possible such as USB-C to USB-C or HDMI to HDMI. Other combinations such as MiniDP to HDMI or MiniDP to USB-C will also work. Some additional configuration may be required to optimize the video-out experience, as described on this page.
|HDMI + USB-C||HDMI-in for audio and video|
USB-C for TouchBack and InkBack
|USB-C supports TouchBack and InkBack with the HDMI A/V connection.|
Use USB-C to USB-A to connect to legacy computers.
NOTE: For best results, connect HDMI before connecting a USB-C cable. If the computer you're using for HDMI is not compatible with TouchBack and InkBack, you won't need a USB-C cable.
(via compute module)
|Single cable needed for A/V|
TouchBack and InkBack is supported
|HDMI (in port)||Video, Audio into Surface Hub 2S||Single cable needed for A/V|
TouchBack and InkBack not supported
|MiniDP 1.2 output||Video-out such as mirroring to a larger projector.||Single cable needed for A/V|
When you connect a guest computer to Surface Hub 2S via the USB-C port, several USB devices are discovered and configured. These peripheral devices are created for TouchBack and InkBack. As shown in the following table, the peripheral devices can be viewed in Device Manager, which will show duplicate names for some devices, as shown in the following table.
|Peripheral||Listing in Device Manager|
|Human interface devices||HID-compliant consumer control device|
HID-compliant pen (duplicate item)
HID-compliant pen (duplicate item)
HID-compliant touch screen
USB Input Device
USB Input Device (duplicate item)
|Keyboards||Standard PS/2 keyboard|
|Mice and other pointing devices||HID-compliant mouse|
|USB controllers||Generic USB hub|
USB composite device
Connecting video-in to Surface Hub 2S
You can input video to Surface Hub 2S using USB-C or HDMI, as indicated in the following table.
Surface Hub 2S video-in settings
|Signal Type||Resolution||Frame rate||HDMI||USB-C|
|PC||640 x 480||60||X||X|
|PC||720 x 480||60||X||X|
|PC||1024 x 768||60||X||X|
|PC||1920 x 1080||60||X||X|
The 4K UHD resolution (3840×2560) is only supported when connecting to ports on the compute module. It is not supported on the “guest” USB ports located on the left, top, and right sides of the device.
Video from a connected external PC may appear smaller when displayed on Surface Hub 2S.
Mirroring Surface Hub 2S display on another device
You can output video to another display using MiniDP, as indicated in the following table.
Surface Hub 2S video-out settings
|Signal Type||Resolution||Frame rate||MiniDP|
|PC||640 x 480||60||X|
|PC||720 x 480||60||X|
|PC||1024 x 768||60||X|
|PC||1920 x 1080||60||X|
|PC||3840 x 2560||60||X|
|4K UHD||3840 x 2560||60||X|
Surface Hub 2S includes a MiniDP video-out port for projecting visual content from Surface Hub 2S to another display. If you plan to use Surface Hub 2S to project to another display, note the following recommendations:
- Keyboard required. Before you begin, you’ll need to connect either a wired or Bluetooth-enabled external keyboard to Surface Hub 2S. Note that unlike the original Surface Hub, a keyboard for Surface Hub 2S is sold separately and is not included in the shipping package.
- Set duplicate mode. Surface Hub 2S supports video-out in duplicate mode only. However, you will still need to manually configure the display mode when you connect for the first time:
- Enter the Windows logo key + P, which opens the Project pane on the right side of Surface Hub 2S, and then select Duplicate mode.
- When you’re finished with your Surface Hub 2S session, select End Session. This ensures that the duplicate setting is saved for the next session.
- Plan for different aspect ratios. Like other Surface devices, Surface Hub 2S uses a 3:2 display aspect ratio (the relationship between the width and the height of the display). Projecting Surface Hub 2S onto displays with different aspect ratios is supported. Note however that because Surface Hub 2S duplicates the display, the MiniDP output will also only display in a 3:2 aspect ratio, which may result in letterboxing or curtaining depending on the aspect ratio of the receiving display.
if your second monitor uses a 16:9 aspect ratio (the predominant ratio for most TV monitors), black bars may appear on the left and right sides of the mirrored display. If this occurs, you may wish to inform your users that there is no need to adjust the second display.
Note the following recommendations:
- USB. USB 3.1 Gen 2 cables.
- MiniDP. DisplayPort cables certified for up to 3 meters in length.
- HDMI. If a long cable is necessary, HDMI is recommended due to the wide availability of cost-effective, long-haul cables with the ability to install repeaters if needed.
Most DisplayPort sources will automatically switch to HDMI signaling if HDMI is detected.
Wirelessly connect to Surface Hub 2S
Windows 10 natively supports Miracast, which lets you wireless connect to Surface Hub 2S.
To connect using Miracast:
- On your Windows 10 device, enter Windows logo key + K.
- In the Connect window, look for the name of your Surface Hub 2S in the list of nearby devices. You can find the name of your Surface Hub 2S in the bottom left corner of the display.
- Enter a PIN if your system administrator has enabled the PIN setting for Miracast connections. This requires you to enter a PIN number when you connect to Surface Hub 2S for the first time.
If you do not see the name of the Surface Hub 2S device as expected, it’s possible the previous session was prematurely closed. If so, sign into Surface Hub 2S directly to end the previous session and then connect from your external device.
Connecting peripherals to Surface Hub 2S
You can connect the following accessories to Surface Hub-2S using Bluetooth:
- Surface Hub 2 pens
After you connect a Bluetooth headset or speaker, you might need to change the default microphone and speaker settings. For more information, see Local management for Surface Hub settings.
AirServer supercharges your Surface Hub into an all-in-one AirPlay + Google Cast + Miracast receiver with its own guest access point for mirroring so the guests can connect directly to the Surface Hub without needing access to the corporate network.
AirServer is intrinsically optimized for both 55' and 84' Surface Hubs and fully supports its incredible 120Hz display, and as a result delivers a true end-to-end buttery smooth 60 FPS mirroring experience. There is nothing like it!
Built-in Guest Access Point
AirServer Surface Hub Edition creates its own access point so guests can connect directly to the Surface Hub without needing access to the corporate network.
Optimized for Intel® Hardware
AirServer is optimized for the Intel processor and is fully hardware accelerated, as a result the CPU utilization rarely exceeds 10%.
60 FPS Mirroring
AirServer's premium hardware accelerated implementation delivers a true end-to-end buttery smooth 60 FPS mirroring.
AirPlay + Google Cast + Miracast
AirServer introduced the world’s first BYOD solution by implementing all the major mirroring technologies. Years later AirServer continues being the pioneer in the field by bringing all these technologies to the Hub.
Connect Mac To Microsoft Surface Hub 2
Zero Client Footprint
Since AirServer communicates using AirPlay, Google Cast and Miracast, there is no need to install any 3rd party apps on the client's device. Everything needed is already built‑in and it is super easy to get started.
AirServer supports mirroring sessions from multiple clients at the same time. Instal printer canon mp287 tanpa cd dgn google. It does this gracefully by aligning each mirroring session intelligently to maximize screen utilization and to minimize black borders.
iOS 12 Compatible
AirServer has maintained AirPlay compatibility since iOS 4.2.1 and has pushed out free compatibility updates with every major version of iOS since 2011.
Windows Device Compatible
Fully compatible with the built-in 'Project to a wireless display' feature in Windows 10. Windows 7 is also supported by installing Google Chrome browser.
AirServer supports both tab casting and desktop casting which is built into all Chromebooks and all desktop platforms with Google Chrome browser.
Connect Mac To Microsoft Surface Hub 2s
Multi-room AirPlay Audio
Just like on the Xbox One, AirServer also brings multi-room AirPlay audio support on the Surface Hub. If you own a set of AirPlay speakers, and use iTunes, be sure to try out the multi-room AirPlay audio feature in iTunes.
Connect Mac To Microsoft Surface Hub
“AirServer is a Mac app that turns your computer into a receiver for AirPlay. We have seen this kind of thing before, but AirServer works better, and adds functionality.”
“Faculty and students also utilize AirServer which enables the display and sharing of iPad content in the classroom.”
“AirServer turns your Mac into a AirPlay receiver, letting you stream audio, photos, and even videos to your computer, right over the air.”
“AirServer is clearly a more complete solution for all kinds of AirPlay streams with dedicated features for audio, video, and Mirroring.”
“Great for demoing iOS apps, and a more professional feature set than..”
“AirServer for Mac, one of our favourite AirPlay receivers, features long-awaited HD recording with post processing filters.”
“What could be better than sending Temple Run or Angry Birds in Space to a large screen, competing side by side with a friend?”
“AirServer app clearly blows away all the competition.”
“With AirServer you can take advantage of the better audio and visuals of your Mac by using the app to transform it into a Apple TV type of device that can be used to stream audio and video.”
“AirServer is so easy to use, we wonder why Apple didn’t implement it themselves.”
“With AirServer running, you’ll see your Mac show up in your iPad’s AirPlay menu, and you can just select it to play back video, movies or games on the big screen. It even supports mirroring so you can use it with apps that don;t yet support AirPlay properly.”